8930-2 - Omnitron ICONV 10/100BTX-100BFX SF SC/SM

The iConverter GX/TM modules are not supported in future software releases and are not recommended for new designs or deployments. View the iConverter GX/TM2 web page.- Carrier-Grade optical Ethernet Network Interface Device- Integrated SNMPv1, SNMPv2c, SNMPv3 and IP-less 802.3ah management- 802.3ah Link OAM for performance monitoring, early fault detection and dying-gasp- 802.1Q VLAN for E-Line and E-LAN services- Quality of Service for Voice/Data/Video over Ethernet- Port MIB statistics and optical performance statistics to support Service Level Agreements- Port Access Control for enhanced security- Configurable Link Fault Propagation modes- Small Form Pluggable (SFP) transceivers with Optical Statistics for standard or CWDM applications- Fixed-fiber connectors available for multimode and single-mode dual fiber and single-mode single-fiber- UTP auto-crossover and auto-negotiation of data rate, duplex modes and pause capabilities- Commercial (0 to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75º C) temperature ranges- NEBS Compliant- Lifetime Warranty and free 24/7 Technical SupportThe iConverter GX/TM conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The GX/TM provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service capabilities. The GX/TM features built-in Operations, Administration and Maintenance (OAM) management with comprehensive monitoring, fault detection and provisioning.The GX/TM is available as a compact standalone unit or as a chassis plug-in module. The hot-swappable GX/TM plug-in module can be mounted in a 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.The plug-in module can manage other modules in the same chassis and operate as a managed 10/100/1000 media converter. It features two Ethernet backplane ports for connectivity to adjacent modules in a chassis for multi-port and multi-service configurations.The standalone GX/TM is available as a tabletop or wall-mount unit. The tabletop model can be DIN-rail mounted using an optional DIN-rail mounting kit. Both the tabletop and the wall-mount models are DC powered and are available with an external AC/DC power adapter or a terminal connector for DC power. The GX/TM standalone unit combines management capability with a compact chassis for deployment at the demarcation point.The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.Metro Ethernet AccessAt the Central Office, the GX/TM plug-in module is installed in a managed iConverter 19-Module chassis for high-density fiber distribution from UTP switch equipment. At Customer Premises 1, the GX/TM plug-in module is installed in a 2-Module chassis with an iConverter 4TxVT four-port switch module. The two modules share data via the Ethernet Backplane. This configuration functions as a remotely managed demarcation switch with a fiber uplink port to the network core and four copper ports that drop off Ethernet service. At Customer Premises 2, the GX/TM standalone NID provides a fiber uplink to a single copper port for intelligent demarcation of Ethernet services.