8903N-1-DW - Omnitron ICONV 10/100M2-100FX SC/SM

10/100BASE-T UTP to 100BASE-X Intelligent Media Converter and Network Interface Device- Carrier-Grade optical Ethernet Network Interface Device- Integrated SNMPv1, SNMPv2c, SNMPv3 and IP-less 802.3ah management- 802.3ah Link OAM for early fault detection and performance monitoring- VLAN with Q-in-Q for E-Line and E-LAN services- Quality of Service for Voice/Data/Video over Ethernet- Bandwidth control (rate limiting) with 64Kb increments- Port MIB statistics and optical performance statistics to support Service Level Agreements- Port Access Control for enhanced security- 2,048 byte Jumbo frames- Layer 2 Control Protocol (L2CP) Policy Control- Configurable Link Fault Propagation modes- Small Form Pluggable (SFP) transceivers with Optical Statistics for standard or CWDM applications- Fixed-fiber connectors available for multimode and single-mode dual fiber and single-mode single-fiber- UTP auto-crossover and auto-negotiation of data rate, duplex modes and pause capabilities- Commercial (0 to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75º C) temperature ranges- MEF 9 and 14 Certified Compliant- NEBS Level 3 Compliant- Lifetime Warranty and free 24/7 Technical SupportThe iConverter 10/100M2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M2 provides intelligent, securely managed service demarcation at the customer premises, offering Layer 2 Control Protocol (L2CP) policy control, Quality of Service and enhanced Bandwidth Control (rate-limiting) capabilities. The 10/100M2 features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.The 10/100M2 is available as a compact standalone unit or as a chassis plug-in module. The hot-swappable 10/100M2 plug-in module can be mounted in a 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.The plug-in module can manage other modules in the same chassis and operate as a managed 10/100 media converter. It features two Ethernet backplane ports for connectivity to adjacent modules in a chassis for multi-port and multi-service configurations.The standalone 10/100M2 is available as a tabletop or wall-mount unit. The tabletop model can be DIN-rail mounted using an optional DIN-rail mounting kit. Both the tabletop and the wall-mount models are DC powered and are available with an external AC/DC power adapter or a terminal connector for DC power. The 10/100M2 standalone unit combines management capability with a compact chassis for deployment at the demarcation point.Carrier-Grade Optical EthernetiConverter fiber access Network Interface Devices and media converters are MEF 9 and 14 certified compliant and NEBS Level 3 compliant. iConverter NIDs enable Carrier-Grade Optical Ethernet with reliability and performance monitoring to support Service Level Agreements (SLAs).The modular design of iConverter fiber access equipment future-proofs Metro Ethernet services with scalability of network services and lowers operating costs with comprehensive OAM management and provisioning.Metro Ethernet AccessAt the Central Office, the 10/100M2 plug-in module is installed in a managed iConverter 19-Module chassis for high-density fiber distribution from UTP switch equipment. At Customer Premises 1, the 10/100M2 plug-in module is installed in a 2-Module chassis with an iConverter 4TxVT four-port switch module. The two modules share data via the Ethernet Backplane. This configuration functions as a remotely managed demarcation switch with a fiber uplink port to the Central Office and five copper ports that drop off Ethernet service. At Customer Premises 2, the 10/100M2 standalone NID provides a fiber uplink to a single copper port for intelligent demarcation of Ethernet services.