8391-1 - Omnitron 10/100 BASE-T 100BASE-FX FIBER

10/100BASE-T UTP to 100BASE-X Ethernet Media Converter- The iConverter 10/100 is an IEEE 802.3 compatible 10BASE-T UTP or 100BASE-TX to Fast Ethernet fiber converter- Supports multimode, single-mode, and single-fiber with ST, SC, LC and MT-RJ connectors- UTP port with 10/100 automatically supports Half or Full-Duplex auto-negotiation with a manual crossover switch- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting- Management is available with the addition of a management module to the chassis- SNMP management via NetOutlook provides real-time port and module information, remote parameter configuration and trap notification- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis- LED displays for immediate visual status of each port- Wide Temperature models available with temperature range of -40 to +60º C- Lifetime Warranty and free 24/7 Technical SupportThe iConverter 10/100 managed media converters are members of the modular iConverter product family, and provide 10BASE-T or 100BASE-TX to 100BASE-FX fiber conversion.The iConverter 10/100 modules are available with multimode, single-mode and single-fiber options, and support ST, SC,MT-RJ and LC connectors. The UTP port supports 10/100 and Half/Full-Duplex auto-negotiation with both hardware and software manual override. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment. The 10/100 also features two Ethernet Backplane ports to provide connectivity to adjacent modules for network expansion and for in-band connectivity to an iConverter Network Management Module.The 10/100 features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.iConverter 10/100 modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.