7Z340011WW - Lenovo LENOVO CE0128PB SWITCH

Abstract The Lenovo CE0152TB Switch is a 1/10 Gb Ethernet (GbE) switch that delivers a compact, high-density, cost-effective GbE solution for network environments where space and power are at a premium. Featuring a small, 1U footprint, this switch is designed for access-layer deployments in branches, retail and workgroup environments, and campus networks. It can also be used as a management network switch in the data center infrastructures. This product guide provides essential pre-sales information on the CE0152TB switch, its key features and specifications, components and options, and configuration guidelines. This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, and other IT professionals who want to learn more about the CE0152TB switch and consider its use in IT solutions. Introduction The Lenovo CE0152TB Switch is a 1/10 Gb Ethernet (GbE) switch that delivers a compact, high-density, cost-effective GbE solution for network environments where space and power are at a premium. Featuring a small, 1U footprint, this switch is designed for access-layer deployments in branches, retail and workgroup environments, and campus networks. It can also be used as a management network switch in the data center infrastructures. The CE0152TB switch offers 48x 10/100/1000BASE-T (RJ-45) fixed ports and 4x SFP+ ports that support 1 GbE and 10 GbE optical transceivers, 10 GbE active optical cables (AOCs), and 10 GbE direct attach copper (DAC) cables. The switch supports a wide range of L2 and L3 features that provide performance, availability, security, and manageability for campus networks. The Lenovo CE0152TB Switch is shown in the following figure. Did you know? The CE0152TB switch supports the GARP VLAN Registration Protocol (GVRP) protocol for simplifying and automating VLAN configuration. The CE0152TB switch supports stacking, enabling up to eight interconnected switch devices to be managed as a single logical device. The CE0152TB switch supports AutoInstall, which enables a switch to automatically configure itself using the resources available on the network, without manual intervention. The CE0152TB switch offers the following features and benefits: High performance The 1/10 GbE CE0152TB switch provides a combination of low latency and non-blocking, line-rate switching. Availability and redundancy The CE0152TB switch offers learns alternate routes automatically and performs faster convergence in case of a link or switch failure. Layer 3 functionality In addition to Layer 2 switching, the CE0152TB switch includes Layer 3 functionality, which provides security and performance benefits of inter-VLAN routing with support for static routes and dynamic routing protocols, including Routing Information Protocol (RIP) and Open Shortest Path First (OSPF). Quality of Service The CE0152TB switch supports traffic classification and processing to provide consistent network performance and efficient use of network bandwidth by allocating and scheduling resources based on service levels requirements for different data streams. Security Working as an enforcement point, the CE0152TB switch provides standards-based 802.1x port-level access control for multiple devices per port, as well as Layer 2-4 policy enforcement with Access Control Lists (ACLs). Stacking The CE0152TB supports stacking of up to eight campus switches (including intermix of CE0128TB, CE0128PB, CE0152TB, and CE0152PB switches), enabling simplified, centralized management of a single logical entity that uses a single switch image, configuration file, management IP address, and management interface. Simplified management To ease deployment, the CE0152TB switch supports the industry-standard Link Layer Discovery Protocol (LLDP) and GARP VLAN Registration Protocol (GVRP) protocols, enabling the switches to automatically discover Ethernet-enabled devices and automate VLAN configuration. AutoInstall The CE1052TB switch supports the AutoInstall feature, which enables upgrading the switch software image and installing configuration files via TFTP automatically during the boot process by using the resources available on the network.

 

Specification:

 

Management features
Multicast support	Yes
Switch type	Managed
Quality of Service (QoS) support	Yes
Switch layer	L2/L3
Ports & interfaces
Copper ethernet cabling technology	1000BASE-T
Basic switching RJ-45 Ethernet ports quantity	24
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Installed SFP+ modules quantity	4
Console port	RJ-45
Power connector	AC-in jack
Network
GARP VLAN Registration Protocol (GVRP)	Yes
Access Control List (ACL) IPv6 entries	256
Access Control List (ACL) IPv4 entries	256
Cable types supported	Cat5, Cat5e
Auto-sensing	Yes
Copper ethernet cabling technology	1000BASE-T
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ac, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3an, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Full duplex	Yes
VLAN support	Yes
Spanning tree protocol	Yes
Routing entries	512
Port mirroring	Yes
Number of VLANs	4093
Link aggregation	Yes
IP routing	Yes
Flow control support	Yes
10G support	Yes
Policy-based routing	Yes
Virtual LAN features	Tagged VLAN
Virtual LAN features
VLAN support	Yes
Number of VLANs	4093
Virtual LAN features	Tagged VLAN
Data transmission
Number of VLANs	4093
Jumbo frames	9216
Throughput	95000000 Mpps
Latency (1 Gbps)	4 µs
Latency (10 Gbps)	2 µs
Number of IP interfaces	192
Packet buffer memory	1.5 MB
MAC address table	16384 entries
Jumbo frames support	Yes
IPv4 & IPv6 features
Access Control List (ACL) IPv6 entries	256
Access Control List (ACL) IPv4 entries	256
Performance
Packet buffer memory	1.5 MB
Stackable	Yes
Physical stacking (units)	8
Mean time between failures (MTBF)	600000 h
Harmonized System (HS) code	85176990
Power
Power connector	AC-in jack
Power supply included	Yes
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	260 W
Number of power supply units	1
Technical details
Physical stacking (units)	8
Form factor	1U
Product colour	Black
Stackable	Yes
Mean time between failures (MTBF)	600000 h
Rack mounting	Yes
Security
SSH/SSL support	Yes
Security algorithms	SNMP, SNMPv3, SSH
Access Control List (ACL)	Yes
Authentication type	RADIUS
Access Control List (ACL) IPv6 entries	256
Access Control List (ACL) IPv4 entries	256
DHCP features	DHCP client, DHCP relay, DHCP server
Multicast features
Multicast support	Yes
Protocols
Management protocols	IPv4/IPv6
GARP VLAN Registration Protocol (GVRP)	Yes
Routing protocols	VRRP
Certificates
Certification	FCC Part 15, Class A; UL 60950-1 / UL 62368-1, ICES-003, Issue 6, Class A; CSA C22.2 60950-1 / CSA C22.2 62368-1, NOM-19, IEC 60950-1, RoHS, CE Mark, TUV-GS, EAC, CCC GB4943.1, GB/T9254, YD/T993, CECP CQC3140, VCCI-CISPR32:2016, Class A, BSMI CNS13438, Class A; CNS14336-1, KN32, Class A; KN35, AS/NZS CISPR 32 Class A, CB
Memory
Packet buffer memory	1.5 MB
Design
Form factor	1U
Product colour	Black
Stackable	Yes
Certification	FCC Part 15, Class A; UL 60950-1 / UL 62368-1, ICES-003, Issue 6, Class A; CSA C22.2 60950-1 / CSA C22.2 62368-1, NOM-19, IEC 60950-1, RoHS, CE Mark, TUV-GS, EAC, CCC GB4943.1, GB/T9254, YD/T993, CECP CQC3140, VCCI-CISPR32:2016, Class A, BSMI CNS13438, Class A; CNS14336-1, KN32, Class A; KN35, AS/NZS CISPR 32 Class A, CB
Rack mounting	Yes
Airflow direction	Side-to-side airflow
Number of fans	3 fan(s)
Mobile network
GARP VLAN Registration Protocol (GVRP)	Yes
Power over Ethernet (PoE)
Power over Ethernet (PoE) power per port	30 W
Power over Ethernet (PoE) ports quantity	24
Power over Ethernet (PoE)	Yes
Operational conditions
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95%
Operating altitude	0 - 118110.2" (0 - 3000 m)
Weight & dimensions
Width	17.4" (441 mm)
Depth	10" (254 mm)
Height	1.73" (44 mm)
Weight	8.16 lbs (3.7 kg)
Packaging data
Manual	Yes
Packaging content
Manual	Yes