Power
The power supplies associated with source devices such as computers, teleconferencing codecs, media players and set-top boxes are designed, according to HDMI standards, to deliver a 55mA hot plug supply. When an accessory demands more current than the source can supply, the system may fail to operate dependably. Insufficient power may manifest as a flashing image (HDCP problem), distorted video (EDID related issues), or even a complete loss of the image (hot plug assertion failure). The HDMI Cable with Built-In Power Inserter allows for the necessary and proper voltages for the hardware “handshake”, HDCP key authentication and exchange, EDID information exchange and hot plug connection detect.
Performance
The attached power inserter isolates the power from the source device and provides dedicated power to support HDMI switching, splitting, and extension accessories. If an installation leverages active cables with embedded chipsets, embedded electronic-to-optical media conversion, signal-sensing, auto-switching or similar devices, then this power inserter will be a critical performance element.
Specification:
Features | |
---|---|
Connector 1 form factor | Straight |
Connector 2 form factor | Straight |
Maximum refresh rate | 60 Hz |
Bandwidth | 600 MHz |
Product colour | Black |
Cable length | 177.2" (4.5 m) |
Connector 1 | HDMI, USB Micro-B |
Connector 2 | HDMI, USB-A, USB Micro-B |
Connector 1 gender | Male/Female |
Connector 2 gender | Male |
HDMI version | 2.0 |
Supported graphics resolutions | 4096 x 2160 |
Quantity per pack | 1 pcs |
Cable jacket material | Polyvinyl chloride (PVC) |
Operational conditions | |
Operating temperature (T-T) | 0 - 50 °C |
Storage temperature (T-T) | -25 - 85 °C |
Packaging content | |
Quantity per pack | 1 pcs |