561242 - Intellinet PROVIDES POWER AND DATA CONNECTION FOR UP TO 24 POE NETWORK DEVICES. POWER OUTPU

High-Power Unmanaged PoE Switch with LCD Status Display_x000D_ _x000D_ The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports (561242) passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1,000 Mbps._x000D_ _x000D_ _x000D_ _x000D_ Power over Ethernet 802.3at_x000D_ _x000D_ This high-powered switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter._x000D_ _x000D_ _x000D_ _x000D_ Innovative LCD Status Display_x000D_ _x000D_ The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports is equipped with an LCD status screen on the front that provides real-time power information. This includes how much power each connected PoE device consumes, the combined used-power total of all connected devices and the total power available. Additionally, the LCD screen informs users of potential warnings for overload, high temperature, short-circuit protection and others. Thanks to this feature, you are always informed about the status of your PoE switch with a glance at the screen._x000D_ _x000D_ _x000D_ _x000D_ Eliminate Bottlenecks with 26 Gigabit Ports._x000D_ _x000D_ Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small, form-factor pluggable GBIC module slots (SFP) provide fibre connectivity for greater distances. These are not shared combo-ports but true Gigabit ports,pushing the total available bandwidth up to 52 Gbps. _x000D_ _x000D_ * Total PoE budget for this switch is 370

 

Specification:

 

Ports & interfaces
Copper ethernet cabling technology	100BASE-TX, 1000BASE-T
Basic switching RJ-45 Ethernet ports quantity	16
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Installed SFP modules quantity	2
Performance
Packet buffer memory	0.5 MB
Stackable	No
Noise level	21.3 dB
Mean time between failures (MTBF)	144000 h
Harmonized System (HS) code	85176990
Technical details
Product colour	Black
Stackable	No
Noise level	21.3 dB
Mean time between failures (MTBF)	144000 h
Housing material	Metal
Rack mounting	Yes
Power over Ethernet (PoE)
Power protection features	Over voltage, Overload, Short circuit
Power over Ethernet (PoE) power per port	30 W
Power over Ethernet plus (PoE+) ports quantity	16
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE)	Yes
Management features
Switch type	Unmanaged
Network
Cable types supported	Cat5, Cat5e
Auto-sensing	Yes
Copper ethernet cabling technology	100BASE-TX, 1000BASE-T
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Full duplex	Yes
Flow control support	Yes
Auto MDI/MDI-X	Yes
10G support	No
Data transmission
Packet forwarding rate (100 Mbps)	148800 pps
Packet forwarding rate (10 Mbps)	14880 pps
Packet forwarding rate (1 Gbps)	1488000 pps
Packet buffer memory	0.5 MB
MAC address table	8192 entries
Switching capacity	36 Gbit/s
Store-and-forward	Yes
Certificates
Certification	FCC A, CE, RoHS
Memory
Packet buffer memory	0.5 MB
Design
Product colour	Black
Stackable	No
LED indicators	Activity, Link, PoE, Power, Speed
Housing material	Metal
Certification	FCC A, CE, RoHS
Rack mounting	Yes
Number of fans	2 fan(s)
Indication
LED indicators	Activity, Link, PoE, Power, Speed
Power
Power consumption (max)	420 W
Power protection features	Over voltage, Overload, Short circuit
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Operational conditions
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90%
Weight & dimensions
Width	17.4" (441.1 mm)
Depth	8.04" (204.3 mm)
Height	1.73" (44 mm)
Weight	8.82 lbs (4 kg)
Packaging data
Rack mount kit	Yes
Manual	Yes
Cables included	AC
Packaging content
Rack mount kit	Yes
Manual	Yes
Cables included	AC