561228 - Intellinet PROVIDES POWER AND DATA CONNECTION FOR UP TO 4 POE NETWORK DEVICES .POE POWER BU

Save installation time and money with PoE. The Intellinet Network Solutions 5-Port Gigabit Ethernet PoE+ Switch passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports - four of which are high-power PoE+ PSE ports - this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps. Power over Ethernet 802.3at The Intellinet Network Solutions 5-Port Gigabit Ethernet PoE+ Switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port.* IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimises the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. Green Ethernet Technology More often than not, a network switch does not utilize all of its ports at all times. Normally, when a computer, notebook, network printer or other network device powers down, the switch continues to consume the same amount of power as if it were active. To overcome this waste of energy, the Intellinet Network Solutions 5-Port Gigabit PoE+ Switch employs the new energy-efficient IEEE 802.3az technology, which detects link status to all connected devices and reduces the power usage of ports that are not in use. To facilitate maximum network performance, the Intellinet Network Solutions switch adjusts power output based on the length of the network cable that is connected to a particular port. When things slow down, it automatically scales back power usage to conserve energy and save money. * Total PoE budget for this switch is 60 watts. Per-port average power distribution is 15 watts; maximum per-port power usage cannot exceed 30 watts.

 

Specification:

 

Network
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Duplex system	Full
Power over Ethernet (PoE)	Yes
Ethernet LAN data rates	10,100,1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Cable types supported	Cat5e
Power over Ethernet (PoE) voltage	48 V
Features
Product colour	Black
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Certification	FCC , CE
Ports & interfaces
Ethernet LAN (RJ-45) ports	2
Power
Output current	1.25 A
Power consumption (max)	60 W
Power over Ethernet (PoE) voltage	48 V
AC adapter input voltage	100 - 240 V
AC adapter frequency	50/60 Hz
Technical details
Number of products included	1 pc(s)
Power over Ethernet (PoE)	Yes
Operating temperature (T-T)	32 - 104 °F
Ethernet LAN data rates	10,100,1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Harmonized System (HS) code	85044090
Operational conditions
Storage temperature (T-T)	-20 - 80 °C
Operating temperature (T-T)	32 - 104 °F
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90%
Weight & dimensions
Weight	10.2 oz (290 g)
Width	2.4" (61 mm)
Depth	4.84" (123 mm)
Height	1.57" (40 mm)
Packaging content
Power cord included	Yes
Manual	Yes
Number of products included	1 pc(s)
Certificates
Certification	FCC , CE