Sidebar Sidebar Sidebar

561211 - Intellinet EXTENDS AN EXISTING POE CONNECTION BEYOND THE 100 M (328 FT.) LIMIT. SAVES TIME

Write a Review
$277.76
$154.31
(You save $123.45 )

Have questions?

Adding to cart… The item has been added
SKU: 561211
Availability: In Stock
Weight: 1.00 LBS
Shipping: Calculated at Checkout
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
Extend the range of a PoE connection - even in harsh outdoor conditions. The Intellinet Network Solutions Outdoor Gigabit High-Power PoE+ Extender Repeater (561211) is designed to extend connection distances from a PoE source to an output device up to 100 m (328 ft.) via Cat5e or Cat6 cable. Cover even longer distances by cascading up to five extenders. The PoE+ Extender Repeater does not need an additional power supply, as it draws the power it needs from the PoE input. Designed for Outdoor Use With an IP65 rating and a vast operating temperature range of -40 75°C (-40 - 167° F), the Intellinet Network Solutions Outdoor Gigabit High-Power PoE+ Extender Repeater can be deployed in harsh conditions, which sets it apart from its indoor counterpart, the Intellinet Network Solutions PoE+ Extender (560962). Simple Installation Simply connect the "PoE In" port with your PoE injector or PoE switch and connect the "PoE Out" with the PoE device that you wish to connect (e.g., a VoIP phone or a PoE network camera). That's it. There is nothing to configure. It simply could not be any easier. Reduced Wiring Costs No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5 cabling to deliver DC power as well as transfer data. Power over Ethernet 802.3at Compliant The Intellinet Network Solutions Outdoor Gigabit High-Power PoE+ Extender Repeater supports the IEEE 802.3at protocol. It is designed to forward data at Gigabit speeds and provide up to 25 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.). Cascading Power Daisy-chaining multiple PoE extenders increase the transmission distance even farther. Be advised that each added PoE extender draws up to 4 W of usable PD power, and additional power losses will occur as the cable length increases.

 

Specification:

 

Ports & interfaces
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-T
Basic switching RJ-45 Ethernet ports quantity5
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Performance
Packet buffer memory0.192 MB
Auto-negotiationYes
Harmonized System (HS) code85176990
Technical details
Product colourBlack
Housing materialMetal
Rack mountingNo
Power over Ethernet (PoE)
Power protection featuresOver voltage, Overload, Short circuit
Power over Ethernet (PoE) power per port30 W
Power over Ethernet plus (PoE+) ports quantity5
Total Power over Ethernet (PoE) budget60 W
Power over Ethernet (PoE)Yes
Management features
Switch typeUnmanaged
Network
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-T
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u
Flow control supportYes
Auto MDI/MDI-XYes
Auto-negotiationYes
Data transmission
Packet forwarding rate (100 Mbps)148800 pps
Packet forwarding rate (10 Mbps)14880 pps
Packet forwarding rate (1 Gbps)1488000 pps
Jumbo frames9000
Packet buffer memory0.192 MB
MAC address table2000 entries
Switching capacity10 Gbit/s
Store-and-forwardYes
Jumbo frames supportYes
Certificates
CertificationFCC Class B, CE
Memory
Packet buffer memory0.192 MB
Design
Product colourBlack
LED indicatorsActivity, Link, PoE, Power
Housing materialMetal
CertificationFCC Class B, CE
Rack mountingNo
Indication
LED indicatorsActivity, Link, PoE, Power
Power
Power consumption (max)70 W
Power supply includedYes
Power protection featuresOver voltage, Overload, Short circuit
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Operational conditions
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90%
Weight & dimensions
Width5.51" (140 mm)
Depth2.99" (76 mm)
Height1.06" (27 mm)
Weight25 oz (710 g)
Packaging data
Rack mount kitYes
Quick start guideYes
Cables includedAC
Packaging content
Rack mount kitYes
Quick start guideYes
Cables includedAC

Customers Also Viewed