561082 - Intellinet POE-POWERED 5-PORT GIGABIT SWITCH WITH POE PASSTHROUGH. 4 X PSE POE PORTS, 1 X P

Save installation time and money with PoE and get the most out each PoE connection with PoE passthrough! The Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with PoE Passthrough is designed to take power from a PoE switch and pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports, this switch can power up to four wireless LAN access points and bridges, VoIP phones or IP video cameras, draw its own power from the PoE switch it is connected to, and deliver network speeds of up to 1,000 Mbps. The Perfect Workgroup Switch When you connect the PD port (port 1) to a PoE+ enabled IEEE 802.3af/at compliant PoE switch, the Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch uses some of the electric current to power itself and passes the available surplus power to up to four PoE edge devices, such as VoIP phones, allowing you to realise the full potential of each of the PSE ports in your data centre. Power over Ethernet 802.3at The Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with PoE Passthrough supports the IEEE 802.3at protocol and is designed to inject up to 25 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter. Eliminate Bottlenecks with Gigabit Speeds Equipped with five auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with its 10 Gbps switch fabric provides plenty of performance for your computers and other networking devices. Green Ethernet Technology More often than not, a network switch does not utilize all its ports at all times. When a computer, notebook, network printer or other network device is powered down, the switch continues to consume the same amount of power as if it were active. Thanks to the new energy-efficient IEEE 802.3az technology, the Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with PoE Passthrough detects link status to all connected devices and reduces the power usage of ports not in use. In addition, the Intellinet Network Solutions switch can adjust the level of power output based on the length of the network cable connected to a particular port. With the Intellinet Network Solutions 5-Port Gigabit PoE+ Passthrough Switch you will enjoy maximum network performance, but when things slow down it automatically scales back power usage to conserve energy and save money. * Total PoE budget for this switch is 68 watts when using the included AC power adapter. This brings the maximum per-port power distribution to 17 watts. When using the PD port to provide power, the total power budget is 26 watts (6.5 watts per port). The maximum per-port power usage cannot exceed 30 watts.

 

Specification:

 

Network
IGMP snooping	Yes
Cable types supported	Cat5,Cat5e
Auto-sensing	Yes
Networking standards	IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3af,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x
Full duplex	Yes
VLAN support	Yes
Spanning tree protocol	Yes
Rate limiting	Yes
Port mirroring	Yes
Link aggregation	Yes
Flow control support	Yes
Broadcast storm control	Yes
Auto MDI/MDI-X	Yes
10G support	No
Auto-negotiation	Yes
Virtual LAN features	Tagged VLAN,Port-based VLAN
Virtual LAN features
VLAN support	Yes
Virtual LAN features	Tagged VLAN,Port-based VLAN
IPv4 & IPv6 features
IPv4 & IPv6 features	Dual stack IPv4/IPv6
Performance
Packet buffer memory	8 MB
Auto-negotiation	Yes
Technical details
Product colour	Black
Housing material	Metal
Rack mounting	Yes
Power over Ethernet (PoE)
Power protection features	Over voltage, Overload, Short circuit
Power over Ethernet (PoE) power per port	30 W
Total Power over Ethernet (PoE) budget	400 W
Power over Ethernet (PoE)	Yes
Management features
Switch type	Managed
Quality of Service (QoS) support	Yes
Switch layer	L2+
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Installed SFP+ modules quantity	2
Data transmission
Packet buffer memory	8 MB
MAC address table	64000 entries
Switching capacity	136 Gbit/s
Store-and-forward	Yes
Jumbo frames support	Yes
Forwarding rate	101.2 Mpps
Security
IGMP snooping	Yes
DHCP features	DHCP client
Protocols
Management protocols	SNMP, HTTP, HTTPS, SSH, TELNET
Supported network protocols	IPv4/v6
IPv4 & IPv6 features	Dual stack IPv4/IPv6
Certificates
Certification	FCC Class A, CE
Memory
Packet buffer memory	8 MB
Design
On/off switch	Yes
Product colour	Black
LED indicators	Activity, Link, PoE, Power
Housing material	Metal
Certification	FCC Class A, CE
Rack mounting	Yes
Indication
LED indicators	Activity, Link, PoE, Power
Power
Power consumption (max)	500 W
Power protection features	Over voltage, Overload, Short circuit
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Operational conditions
Storage temperature (T-T)	-20 - 90 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90%
Weight & dimensions
Width	17.3" (440 mm)
Depth	13" (331 mm)
Height	1.73" (44 mm)
Weight	11 lbs (5 kg)
Packaging data
Mounting brackets included	Yes
Manual	Yes
Cables included	AC
Packaging content
Mounting brackets included	Yes
Manual	Yes
Cables included	AC