560962 - Intellinet 1-PORT GIGABIT HIGH-POWER POE+ EXTENDER REPEATER, IEEE 802.3AT/AF POW

Extend the range of a PoE connection! The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater, Model 560962, is designed to extend connection distances from a PoE source to an output device another 100 m (328 ft.) via Cat5e or Cat6 cable. You can cover even longer distances by cascading these extenders on a network. The PoE+ extender does not need any additional power supply, as it draws the power it needs from the PoE input. Simple Installation Simply connect the "PoE In" port with your PoE injector or PoE switch, and connect the "PoE Out" with the PoE device that you wish to connect; e.g., a VoIP phone or a PoE network camera. That's it. There is nothing to configure. It simply could not be any easier. Reduce Wiring Costs No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5 cabling to deliver DC power as well as transfer data. Power over Ethernet 802.3at Compliant The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater supports the IEEE 802.3at protocol and is designed to forward data at Gigabit speeds and up to 30 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.). Cascading Power You can daisy-chain multiple of the PoE extenders to increase the transmission distance even further. For each PoE extender added, you lose about 4 watts of usable PD power, but if you start with a PoE injector that outputs 30 watts of IEEE 802.3at power - for example, the Intellinet Network Solutions PoE injector (Model 560566) - then you still have 8.6 watts for your PoE device, 5 PoE extenders down the line and 600 meters (1968 ft.) away.

 

Specification:

 

Ports & interfaces
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Basic switching RJ-45 Ethernet ports quantity	16
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Gigabit Ethernet (copper) ports quantity	16
Technical details
Form factor	1U
Product colour	Black
Housing material	Metal
Rack mounting	Yes
Power over Ethernet (PoE)
Power protection features	Over voltage, Overload, Short circuit
Power over Ethernet (PoE)	Yes
Management features
Switch type	Unmanaged
Switch layer	L2
Network
Cable types supported	Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Full duplex	Yes
Flow control support	Yes
Auto MDI/MDI-X	Yes
10G support	No
Data transmission
MAC address table	8192 entries
Switching capacity	32 Gbit/s
Store-and-forward	Yes
Forwarding rate	1.488 Mpps
Certificates
Certification	FCC Class B, VCCI Class A, CE, RoHS
Design
Form factor	1U
Product colour	Black
LED indicators	Yes
Housing material	Metal
Certification	FCC Class B, VCCI Class A, CE, RoHS
Rack mounting	Yes
Performance
Buffer size	256 KB
Harmonized System (HS) code	85176990
Indication
LED indicators	Yes
Power
Power consumption (max)	260 W
Power protection features	Over voltage, Overload, Short circuit
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Operational conditions
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90%
Weight & dimensions
Width	17.4" (442 mm)
Depth	8.19" (208 mm)
Height	1.73" (44 mm)
Weight	8.38 lbs (3.8 kg)
Packaging data
Rack mount kit	Yes
Manual	Yes
Cables included	AC
Packaging content
Rack mount kit	Yes
Manual	Yes
Cables included	AC