560566 - Intellinet 30W GIGABIT HIGH POWER POE+ INJECTOR

Reduce costs by using existing Cat5 cable to provide both power and data. The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The PoE Injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts. That's enough for even power-hungry PoE devices. Reduce Wiring Costs No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5e/6 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads and high voltages.

 

Specification:

 

Ports & interfaces
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Basic switching RJ-45 Ethernet ports quantity	8
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Power connector	DC-in jack
Performance
Packet buffer memory	256 MB
Harmonized System (HS) code	85176990
Power
Power connector	DC-in jack
Power consumption (max)	150 W
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power source	AC
Technical details
Product colour	Black
Housing material	Metal
Rack mounting	Yes
Network
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Full duplex	Yes
10G support	No
Data transmission
Packet buffer memory	256 MB
MAC address table	8000 entries
Switching capacity	16 Gbit/s
Store-and-forward	Yes
Certificates
Certification	FCC Class B, VCCI Class B, CE, RoHS, EN 60950-1
Memory
Packet buffer memory	256 MB
Design
Product colour	Black
LED indicators	Yes
Housing material	Metal
Certification	FCC Class B, VCCI Class B, CE, RoHS, EN 60950-1
Rack mounting	Yes
Indication
Power LED	Yes
LED indicators	Yes
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Yes
Operational conditions
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90%
Weight & dimensions
Width	11" (280 mm)
Depth	7.09" (180 mm)
Height	1.73" (44 mm)
Weight	4.41 lbs (2 kg)
Packaging data
Manual	Yes
Cables included	AC
Logistics data
Harmonized System (HS) code	85176990
Other features
Power LED	Yes
Packaging content
Manual	Yes
Cables included	AC