485OI9TB - IMC Networks 9P/TERM BLK OPTO ISO 485 CONV
Write a Review
Write a Review
IMC Networks
485OI9TB - IMC Networks 9P/TERM BLK OPTO ISO 485 CONV
$238.39
$132.44
(You save
$105.95
)
SKU:
485OI9TB
Condition:
Refurbished
Availability:
In Stock
Weight:
1.00 LBS
Shipping:
Calculated at Checkout
Connector 1:
DB-9
Connector 2:
Terminal block
RS-485 signals:
Data+,Data-,GND
RS-422 signals:
GND
RS-232 signals:
GND
Output interface:
RS-422/485
Isolation:
1.5 kV
Host interface:
RS-232
Product colour:
Blue
Baud rate:
9.6 Kbit/s
Width:
2.17 (55 mm)"
Depth:
3.27 (83 mm)"
Height:
0.669 (17 mm)"
Power consumption:
900 mA
Input voltage:
10 - 14 V
Storage temperature (T-T):
-40 - 85 °C
Certification:
cULus, File Number: E222870, FCC Part 15, CISPR, EN 55022: 2010 + AC:2011 Class B Emissions, CE, EN 61000-6-1: 2007, EN 61000-4-2: 2009
Housing material:
Plastic
Isolated Serial Converter Model 485OI9TB is a basic, isolated converter. It converts unbalanced, full duplex RS-232 signals to balanced full-duplex (4-wire) RS-422/485 or halfduplex (2-wire) RS-485 signals. The converter provides 1,500 Volts RMS optical isolation of the data lines and ground (and connected devices) between the RS-232 and RS-422/485 signals. RS-232 port has a female DB9 connector. RS-422/485 port has a 6-position terminal block. The RS-232 side of the converter draws power from the handshake lines (DTR, RTS). At least one handshake line must be asserted (raised high) to power the RS-232 side.The RS-422/485 side must be powered by an external 12 VDC power supply (sold separately).
Related Products
485SD9RJ - IMC Networks 9PIN 232/485 CONV W/SD & RJ11
B&B Electronics 485SD9RJ. Width: 1.25" (31.8 mm), Depth: 2.88" (73.1 mm), Height: 0.626" (15.9 mm). Input voltage: 12 V, Power consumption: 40 mA. Certification: FCC Part 15, CISPR, EN 55022:...
$194.65
$108.14
ADAM-4561 - IMC Networks USB 1 PORT ISO TO 232/422/485
ADAM-4561 - IMC Networks USB 1 PORT ISO TO 232/422/485
$274.84
$152.69
USOPTL4 - IMC Networks USB TO ISOLATED RS-422/485 CONVERTER W/ TERMINAL BLOCK
USOPTL4 - IMC Networks USB TO ISOLATED RS-422/485 CONVERTER W/ TERMINAL BLOCK
$314.93
$174.96
485CON - IMC Networks RS-485 CONVERTER
RS-232 to RS-485 Converter This RS-232 to RS-485 converter converts unbalanced, full-duplex RS-232 signals to balanced, full-duplex or half-duplex RS-485 signals. RS-485 is an enhanced version osf...
$341.15
$189.53
485OP - IMC Networks RS-485 OPTICAL ISOLATOR
Optically Isolated RS-422/485 Repeaters Model 485OP is an optically isolated RS-422/485 signal repeater. In addition to 2KV isolation on the data lines, it can be used to extend RS-422/485 circuits...
$398.61
$221.45