Sidebar Sidebar Sidebar

4333-1 - Omnitron 100 BASE-T / 100 BASE-F

Write a Review
$1,090.85
$606.03
(You save $484.82 )

Have questions?

Adding to cart… The item has been added
SKU: 4333-1
Condition: Refurbished
Availability: In Stock
Weight: 1.00 LBS
Shipping: Calculated at Checkout
Networking standards: IEEE 802.3
Maximum data transfer rate: 100 Mbit/s
Connectivity technology: Wired
Ethernet LAN (RJ-45) ports: 1
Input voltage: 120 V
External power adapter: Yes
AC input frequency: 60 Hz
Operating temperature (T-T): 0 - 50 °C
Operating relative humidity (H-H): 5 - 95%
Operating altitude: -3937 - 157480.3 (-100 - 4000 m)"
Transmit power range: -15 - -8 dBmW
Receive power: -31 - -8 dBmW
46C566DB-4644-460E-8DA7-038C0B9646AB E06A9D60-42A9-4459-8131-FA3002495928
Fast Ethernet Fiber to Copper Media Converter- The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter- Supports auto-negotiation of duplex modes for easy installation- Extends network distances up to 120km- Supports most network interfaces with a wide variety of cable and connector types- Labeled status LEDs and switches for quick and easy installation- Features a crossover switch for connection to switches or workstations- Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint Powered Chassis- Completely software independent with no installation of drivers required- Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical supportThe FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter that provides reliable and cost-effective network connectivity and fiber extension.The FlexPoint 100Fx/Tx UTP port auto-negotiates to the highest level of performance supported by the attached device. Manual switch settings and LED indicators with on-the-label descriptions enable easy configuration to legacy devices or matching specific network requirements.The FlexPoint 100Fx/Tx fiber port operates at 1310nm or 1550nm and supports SC, ST, VF-45 or MT-RJ connectors. Multimode models support distances up to 5km and single-mode models support distances up to 120km.Diagnostic data is provided through LED indicators that assist in network installation and maintenance. The LEDs report the availability of power, port activity and link status, duplex mode and error indicators.The FlexPoint 100Fx/Tx features a crossover switch that eliminates the need for a crossover cable and facilitates connectivity to network equipment such as switches or workstations.FlexPoint modules can be mounted utilizing optional wallmounting hardware or with DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a high-density 14-Module, power-redundant Powered Chassis.FlexPoint modules installed in the 5-Module shelf or used as standalone devices can be powered by an external AC to DC power adapter, or through the 5VDC chassis connector. Standalone modules can also be powered by attaching an external DC power supply (18-60VDC). When used in the 14-Module power-redundant Powered Chassis with any combination of AC and DC power supplies, the installed modules are powered via the 5VDC chassis connector.The wide variety of FlexPoint mounting and power options provide flexible upgrade paths as network requirements change and grow.FlexPoint unmanaged media converters are easy to use and provide dependable fiber connectivity in Enterprise and Government networks around the world.

Customers Also Viewed