29273 - C2G 4K HDMI HDBASET + SERIAL RS232 OVER CAT6 EXTENDER BOX RECEIVER TAA

The HDMI+RS232 over Cat5 Receiver, when paired with a transmitter (not included- #29271) allows for the extension of an HDMI signal over solid conductor Cat5e/6 twisted pair cable* up to 300ft without signal degradation at a 1080p video resolution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. In addition, this solution utilizes TruChoice™ Power which provides the flexibility to power the system with a single power supply at either the transmitter or receiver end. HDBaseT technology allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension. The HDMI over Cat5 extenders support advanced HDMI features such as 3D, auto lip sync, deep color, Dolby & DTS 7.1 audio, CEC and a 10.2 Gbps data transfer rate.

The serial RS232 port acts as a pass-through allowing remote control of the display.

*Stranded Cat5e/6 cables may be used for HDMI extension applications up to 250ft. Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments.

- Single Cat5 cable required for HDMI extension
- HDMI features supported
- 3D
- Auto lip sync
- Deep color
- Dolby & DTS 7.1 Audio
- Consumer Electronics Control (CEC)
- 10.2 Gbps
- EDID pass through
- FCC, CE, RoHS compliant
- Requires a transmitter to function - #29271

- Extend 4K HDMI (4096 x 2160 at 30Hz, 4:4:4) up to 230ft
- Extend 4K HDMI (4096 x 2160 at 60Hz, 4:2:0) up to 230ft
- Extend HDMI (1920 x 1080) up to 328ft
- Extend Serial RS232 up to 328ft
- Utilizes a single Cat5e, Cat6 or Cat6a cable for extension
- HDBaseT technology supports EDID pass through
- TruChoice Power allows for power at transmitter or receiver end

 

Specification:

 

Features
Type	AV transmitter
Maximum resolution	1920 x 1200 pixels
Cable types supported	Cat5,Cat5e,Cat6
Maximum transfer distance	3598.4" (91.4 m)
Supported video modes	1080p
Supported graphics resolutions	1920 x 1080 (HD 1080),1920 x 1200 (WUXGA)
LED indicators	Yes
Product colour	Aluminum
Ports & interfaces
RJ-45 output ports	3
HDMI in	4
Video in	4
DC-in jack	Yes
Power
Power requirements	100 - 240V
Operating voltage	18 V
Current	1 A
Weight & dimensions
Transmitter width	7.52" (19.1 cm)
Transmitter height	1.75" (4.45 cm)
Transmitter depth	5.24" (13.3 cm)
Weight	4.37 lbs (1.98 kg)
Packaging content
AC adapter included	Yes