2423-1-T - Omnitron ICONVERTER TM3 GIGE TRANSPORT

The iConverter Modular T1/E1 Multiplexer transports up to sixteen T1/E1 circuits and 10/100/1000 Ethernet over point-to-point fiber, CWDM channel or Ethernet Virtual Connection (EVC). This flexible and scalable system is comprised of an iConverter Fiber Transport module, and one or more iConverter 4xT1/E1 MUX modules installed in a 2, 5 or 19-module chassis.Each iConverter Fiber Transport module and up to four contiguous iConverter 4xT1/E1 MUX modules combine to form a MUX group. A MUX group can connect with another MUX group at the opposite end of a dedicated fiber link or EVC. A MUX group can also interoperate with a managed iConverter fixed-configuration T1/E1 Multiplexer.Multiple MUX groups can be installed in a chassis, enabling high-density, star-topology deployments.There are three Fiber Transport modules available: the iConverter TM3, the iConverter GM3 NID plug-in module and the iConverter GM4 NID plug-in module. The TM3 supports Ethernet Link OAM with IEEE 802.3ah. The GM3 and GM4 NID modules support Carrier Ethernet Service OAM with IEEE 802.1ag Connectivity Fault Management and ITU-T Y.1731 Performance Monitoring.The Fiber Transport module is available with fixed-fiber or Small Form Pluggable (SFP) transceivers, and feature two Ethernet backplane ports for additional Ethernet connectivity to adjacent modules. A common application of this feature is to combine a 4-Port switch module in the adjacent slot to provide a solution with four additional 10/100/1000 ports.The iConverter 4xT1/E1 MUX module supports four copper RJ-48 ports for balanced T1/E1 applications. Adapter cables are available to convert each RJ-48 interface to a BNC interface for unbalanced E1 transport applications.The 4xT1/E1 MUX module features an optional external clock port that can be configured as a clock input or output. As an input, the port can be connected to an external clock source, such as a GPS receiver, to provide a common reference clock for the module. As an output, the port can provide the recovered T1/E1 clock from port 1 to other TDM equipment at the site.The T1/E1 Multiplexer modules are part of the iConverter multiservice platform, and can be installed in a chassis equipped with iConverter Network Interface Devices, media converters, transponders and CWDM multiplexers. The multi-service platform is capable of delivering Ethernet, TDM, SONET and other services across a Wide Area Network. iConverter modules can be added to this scalable architecture to expand bandwidth capacity and add new services.